4.6 cu ft ABS Built-In Pharmacy/Vaccine Glass Door Refrigerator – NSF/ANSI 456 Certified (Temperature Range: 1°C – 10°C)

The 4.6 cu ft ABS Built-In Pharmacy/Vaccine Refrigerator, ADA Compliant – NSF/ANSI 456 Certified is designed in accordance with the NSF/ANSI 456 Standard for Vaccine Storage. With NSF certification, units protect pharmaceuticals at optimal temperatures, preventing waste and allowing for peak delivery.



Features and Benefits

• Operational Environment: Indoor use only, +18°C to +26°C (+65°F to +78°F), &lt,70% RH
• Storage Capacity: 4.6 cu. ft. gross volume
• Door: One swing glass door, self-closing, right hinged, non-reversible, magnetic sealed gasket, keyed lock
• Shelves: Three shelves (two adjustable/one fixed) with guard rail on back
• Mounting: Low profile roller wheels and leveling legs
• Interior Lighting: Shielded, switched LED lighting, full coverage, balanced spectrum
• Airflow Management: Forced Air technology, patent pending
• External Probe Access: Rear wall port (1/2′) diameter
• Insulation: Cabinet is foamed-in-place with EPA compliant high density urethane foam
• Exterior Materials: White powder coated steel
• Access Control: Pyxis®, Omnicell® and AcuDose RX® compatible
• Product Weight: 100 lbs
• Shipping Weight: 140 lbs
• Rated Amperage: 1.74 Amps
• Power Plug/Power Cord: NEMA 5-15 plug, 8 to 10 ft typical, conforms to UL471 requirements, Vaccine storage power cord warning label
• Facility Electrical Requirement: 110-120V AC: 15 A (minimum)
• Agency Listing and Certification: Certified in accordance with the NSF/ANSI 456 Standard for Vaccine Storage. UL, C-UL, ETL, CETL listed (either single or dual agency listings) and certified to UL471 standard, hydrocarbon refrigerant safety
• Included Accessories
  • Temperature monitor device (TMD) complies with the current CDC guidelines, with 3 years certification of calibration, “buffered” probe in the product simulated solution, min/max memory. F/C switchable, field installable, and visual & audible temp alarm

Technical Specifications

• Refrigeration System
  • Compressor: Hermetic, High Performance
  • Refrigerant: EPA SNAP Compliant, R600A, ISOBUTANE
  • Condenser: Hybrid fin tube with low noise fan
  • Evaporator: Plate Wall
  • Defrost: Cycle, Optimized, Zero Energy
• Performance
  • Uniformity (Cabinet Air): +/- 0.8°C
  • Stability (Cabinet Air): +/- 1.2°C
  • Maximum Temperature Variation (Cabinet Air): +/- 1.4°C
  • Temperature Rise After an After 8 Sec Door Openings: Temperature did not exceed 6.4°C at any probe for all required NSF/ANSI 456 testing protocols
  • Recovery After 3 Min Door Opening: All probes recover to under 8°C within 4.8 min.
  • Energy Consumption: 1.15 KWh/day
  • Average Heat Rejection: 1.57 KWh/day (224 BTU/h)
  • Noise Pressure Level (dBA): 43 or less installed
  • Pull Down Time to Nominal Operating Temp: 35 min
• Controller, Configuration, Alarms and Monitoring
  • Controller Technology: Parametric, microprocessor, LED display with 0.1°C resolution
  • Temperature Setpoint Range: 1°C to 10°C (Setpoint must remain unaltered from the factory setting to remain compliant with NSF/ANSI 456 performance requirements)
  • Display Probe: Calibrated, stainless steel
  • External Alarm Connection
    • State switching remote alarm contacts
    • Visual and audible indicators
  • Alarms: High / Low temperature, compliant with alarm requirements defined in the NSF/ANSI 456 Standard for Vaccine Storage
  • Simulator Ballast: 20 ml bottle, glass bead thermal media

Dimensions









Warranty Information

• 2-Year Warranty on Parts and Labor, Excluding Display Probe Calibration
• 5-Year Warranty on Compressor Warranty